Nickel Alloy Welding Wire ENiFe-Cl Mig Welding Wire

Ferro-nickel solid wire used for welding cast iron and ductile iron.

Products Details

Nickel Alloy Welding Wire ENiFe-Cl Features and Applications Ferro-nickel solid wire used for welding cast iron and ductile iron. Suitable for dissimilar joints between cast iron, mild steel, low alloy and stainless steels. Recommended for welding high sulphur, phosphorous or lubricant-contaminated castings. Precision layer wound for superior wire feeding characteristics. Typically used for a range of repair and fabrication applications, including rebuilding shafts, wheels, critical joints between steel and cast iron etc Typical Base Materials Grey cast iron, malleable, nodular* * Illustrative, not exhaustive list  
Standards
EN ISO 1071 - SC NiFe-1
AWS A5.15 - E NiFe-CI
 
Chemical Composition %
C% Mn% Si% P% S%
max max max max max
2.00 0.80 0.20 0.03 0.03
Fe% Ni% Cu% Al%
rem. 54.00 max max
56.00 2.50 1.00
 
Mechanical Properties
Tensile Strength 400 - 579 MPa
Yield Strength -
Elongation -
Impact Strength -
Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - I1, Ar + 1-2% O2   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF  
Packaging Data
Diameter Weight Spool Pallet Qty
1.20 mm 15 Kg BS300 72
Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.  

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours