Nickel Alloy Welding WireTig Wire ERNiCrMo-10

Standards

EN ISO 18274 - Ni 6022 - NiCr21Mo13Fe4W3

AWS A5.14 - ER NiCrMo-10

Features and Applications Nickel-chromium-molybdenum alloy designed for joining C22, 625, 825 or combinations of these alloys. Provides a tough Nb-free weld metal for dissimilar welds in super austenitic and super duplex stainless steels. Offers excellent resistance against stress & corrosion cracking, pitting and crevice corrosion. Extensively used for overlays and cladding of lower alloy steels. Typically used in the welding of aggressively corrosive media in chemical processing plants, corrosion resistant overlays and in severe offshore and petrochemical environments etc. Test Certificates can be found online @wilkinsonstar247.com Typical Base Materials Alloy 22, Alloy 625, Alloy 825, Alloy 926* * Illustrative, not exhaustive list

Chemical Composition %
C%	Mn%	Fe%	P%	S%	Si%	Cu%
max	max	2.00	max	max	max	max
0.010	0.50	6.00	0.020	0.010	0.08	0.50

Ni%	Co%	Cr%	Mo%	V%	W%
49.00	max	20.00	12.50	max	2.50
min	2.50	22.50	14.50	0.30	3.50

Mechanical Properties
Tensile Strength	≥690 MPa
Yield Strength	-
Elongation	-
Impact Strength	-

Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors. Shielding Gases EN ISO 14175 - TIG: I1 (Argon) Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Packaging Data
Diameter	Length	Weight
1.60 mm

2.40 mm 3.20 mm1000 mm 1000 mm 1000 mm5 Kg 5 Kg 5 Kg Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.

Nickel Alloy Welding Wire ERNiCrMo-10 Tig Wire

Products Details

Featured Products

Contact us